Brief Introduction
This terminal section analyzer is the first special instrument for testing terminal section developed by Huanell Technology in Chinese Mainland in 2006, and also the first test instrument developed in China. After more than 10 years of continuous optimization, it meets the customer's personalized needs from hardware to software, not just a set of standards for a brand of automotive wiring harness industry, but can completely customize product standards and make judgments according to the internal needs of enterprises. At present, there are over a hundred users involved in various fields such as automobiles, home appliances, electronics, electrical appliances, new energy, aerospace, high-speed rail, etc.
Main features:
1. Four fold cutting safety protection to ensure personnel safety during cutting;
2. The fixture is made of 45 # bearing steel that has undergone high-temperature hardening treatment (non aluminum) to prevent clamping wear and tooth end loosening.
3. After the grinding disc is installed on the machine, CNC precision milling is used to ensure full flatness and smoothness
4. The cutting disc is adjusted in three directions using XYZ, and the perpendicularity is calibrated with a dial gauge
一、TCM 2500用途(usage)： 本端子截面分析仪是一体型端子切割和研磨仪：包括切割与研磨。 制作一个样品5分钟左右即可完成，线径范围AWG000-AWG46，最大夹持直径12mm。 该系统适合汽车业、家电业、电子业等领域端子截面分析测试要求。
The terminal cross section of the analyzer is integrated terminal cutting and grinding instrument, automatic cutting and grinding, Cutting and grinding time is about 5 minutes, fit diameter range AWG000-AWG46; hold max 12 mm terminal diameter. The system is suitable cross-sectional areas of the terminal automotive industry, household appliances industry, electronic industry and other analytical testing requirements
二、TCM-2000S系统特点(Characteristic)
2.1无需树脂凝固(Without resin solidification)；
Previously, resin solidification and hardening cutting; Then rough grinding, polishing, time-consuming and laborious, making a sample takes several hours. Now this product does not require resin solidification, automatic cutting and grinding, and can be completed within 5 minutes after testing a sample.
2.2端子专用夹具,适用于不同规格的端子(special Terminal fixture, suitable for different kinds of terminal blocks)；
标准夹具适用于AWG000～AWG46线（suit for AWG000～AWG46）；
2.3本设备可对切割时可进行端子上下切割位置调整（The device can be carried out while cutting the vertical cutting position adjustment terminal）；
2.4方便测量端子压接高度、宽度毛刺尺寸、壁厚、铜丝数量、压缩比、压接面积等计算（Easy to measure terminal crimp height, width burr size, wall thickness, the number of copper wire, the compression ratio , crimping and area calculation）；
2.5一键式导出报告(One-click Export excel Report)；
2.6. Terminal specific fixtures can correspond to various sizes of terminals
Exquisite stainless steel material fixture (aluminum material from other countries, easy to wear), fine tooth clamping, a good assistant for precision cutting, corrosion-resistant;
2.7．Professional terminal analysis software in both Chinese and English (exported to the Asian and European markets), supporting the Windows operating system; Can analyze over 10 standard test data such as compression ratio C/R, C/H, C/W, porosity, etc., fully meeting standards such as VW60330, Renault 36-05-019/- G, PSA 9634115099, QC T 417.1-2001, etc; You can also customize testing standards without worrying about them; Accurately locate the testing location, provide a concise screen, and export the terminal section testing report (Excel format) with one click, which can be saved or printed.
三、系统结构(System Structure)
1. 端子截面分析(Terminal Analyze)：进口连续变倍光学系统(Imported continuous variable power optical system)；物镜倍率0.7—4.5X
2. 视频总倍率(Video total magnification)：65~419X
3. 适用线径范围：AWG000-AWG46，0mm2---75mm2,
4. 电源(Power supply)：AC100V~AC240V 功率（P）350W
5. 成像系统(Imaging Systems)： 德国Balser 500万高清彩色数字CCD摄像头German Balser 5 million high-definition color digital CCD camera
6. 切割片规格：Φ125X0.5mm
7. 研磨砂纸(Polishing sandpaper)：125mm/ 1500#,
8. 华乃尔精密一体式切割研磨设备(Model),TCM2500；
9. 专业端子截面分析软件(Professional terminal section analysis software ),X-Scan
10. 高精度基准尺（Standard optical device）:0.1/10mm
11. 端子金相配件（Cleaning liquid）
12. 照明光源(Lighting)：同轴纯白LED光源及控制
13. 22 inch all-in-one machine
