Brief introduction: The LSQ-100 vertical sample cutting machine is suitable for cutting samples of various metal and non-metallic materials, in order to observe the metallographic and petrographic structures of the materials. 1、 Overview: This machine is suitable for cutting samples of various metal and non-metallic materials, in order to observe the metallographic and petrographic structures of the materials. This machine is equipped with a cooling device, and the configured coolant can take away the heat generated during cutting, avoiding overheating and burning the sample tissue. This machine is convenient and safe to use. It is one of the necessary equipment for factories, research institutions, and laboratories in colleges and universities to produce samples. 2、 Features: 1. The super large cutting chamber enables this machine to cut large specimens; 2. Dual drive vises and "T" groove workbenches are beneficial for users to grip each Special shaped workpieces; 3. Built in 60 liter ultra strong cooling system; 4. Cooling liquid filtration device; 5. Independent cutting lighting system; 6. Perform anti-corrosion treatment on the cutting chamber and water tank. 3、 Technical indicators: 1. Power supply: three-phase four wire (380V, 50HZ) 2. Spindle speed: 2800 rpm 3. Grinding wheel specification: 350 × two × 32mm 4. Maximum cutting diameter: 100mm 5. Motor: 3.0KW