Brief Introduction
Metallographic cutting pieces are suitable for cutting metallographic specimens, and all cutting pieces are made of selected special abrasives, which are not easy to break; Sharp cutting, minimal cutting heat, and shallow heat affected layer of the sample, thus minimizing interference and providing a perfect prerequisite for the next step of metallographic sample preparation.
Metallographic cutting piece
Application scope:
Suitable for cutting metallographic specimens, all cutting pieces are made of selected special abrasives, which are not easy to break; Sharp cutting, minimal cutting heat, and shallow heat affected layer of the sample, thus minimizing interference and providing a perfect prerequisite for the next step of metallographic sample preparation. Choosing the right grinding wheel cutting blade according to the different materials required for cutting can improve cutting efficiency and minimize damage to the sample.
series | material | Product characteristics | specifications | package | Suitable materials for cutting |
A | Brown corundum and silicon carbide | Product hardness: harder Consumption speed: medium | Φ250×2×32mm | 50 pieces/box | Ductile iron, malleable iron, high phosphorus cast iron, alloy cast iron, bronze, and unhardened steel, etc |
Φ350×2.5×32mm | 40 pieces/box |
Φ450×3.2×32mm | 40 pieces/box |
B | B1 | White alumina and silicon carbide | Product hardness: relatively hard, suitable for cutting material hardness: HRC40-50, consumption speed: medium | Φ250×1.5×32mm | 50 pieces/box | High quality carbon steel, alloy tool steel, alloy structural steel, carbon tool steel, stainless steel, bearing steel, and quenched steel |
Φ250×2×32mm | 50 pieces/box |
Φ350×2.5×32mm | 40 pieces/box |
Φ450×3.2×32mm | 50 pieces/box |
B2 | Product hardness: relatively soft, suitable for cutting material hardness: HRC50-70, consumption speed: fast | Φ250×2×32mm | 50 pieces/box |
Φ350×2.5×32mm | 40 pieces/box |
C | silicon carbide | Product hardness: harder Consumption speed: medium | Φ250×2×32mm | 50 pieces/box | Grey cast iron, brass, cast aluminum, aluminum alloy, tungsten, molybdenum, zinc, etc |
Φ350×2.5×32mm | 40 pieces/box |
D | | Single crystal corundum and chromium corundum | Product hardness: relatively soft, suitable for cutting material hardness: HRC50-70, consumption speed: fast | Φ250×2×32mm | 50 pieces/box | Special ductile iron, bearing steel, alloy structural steel, high-speed steel, high vanadium high-speed steel, stainless steel, alloy tool steel, carbon tool steel, high-quality carbon steel, and workpieces with high hardness that are prone to burns |
Φ350×2.5×32mm | 40 pieces/box |
Φ450×3.2×32mm | 20 pieces/box |