Brief Introduction
Metallographic cutting cooling lubricant This product is specially developed for grinding wheel cutting of metallographic samples, and has extremely strong cooling, lubrication, and rust prevention properties: during cutting, reduce the sample temperature to reduce the impact of heat on the sample;
Detailed Introduction to Metallographic Cutting Cooling Lubricants
1、 Introduction
1. This product is specially developed for grinding wheel cutting of metallographic samples, and has extremely strong cooling, lubrication, and rust prevention properties:
2. Reduce sample temperature during cutting to reduce sample size
3. Affected by heat;
4. Produce cleaning and rust prevention effects on the sample;
5. Increase lubrication performance and improve surface gloss of the sample
6. Cleanliness can simultaneously improve the lifespan of cutting blades;
7. Prevent corrosion of the cutting machine;
8. This product is non-toxic, odorless, and pollution-free, making it an environmentally friendly and safe product;
9. The solution is clear and transparent, free of mineral oil and nitrite.
2、 Usage method
First, clean the original liquid in the cutting machine;
Mixed concentration: The original solution: water=5: 100;
Mixing method: According to the volume of the cutting machine cooling water tank, first add a certain amount of water to the cutting machine cooling water tank, and then add 5% cutting cooling lubricant;
After the liquid in the cooling water tank of the cutting machine is reduced to a certain extent, add the original liquid and water according to the above ratio.
