Brief introduction: Q-2 metallographic specimen cutting machine (hereinafter referred to as cutting machine) is a machine that uses high-speed rotating thin grinding wheels to cut metallographic specimens. It is widely used in metallographic laboratories to cut various metal materials. Due to the cooling device attached to this machine, it is used to remove the heat generated during cutting, thus avoiding the possibility of changing the metallographic structure of the sample when exposed to heat. 1、 Overview: Q-2 metallographic specimen cutting machine (hereinafter referred to as cutting machine) is a machine that uses high-speed rotating thin grinding wheels to cut metallographic specimens. It is widely used in metallographic laboratories to cut various metal materials. Due to the cooling device attached to this machine, it is used to remove the heat generated during cutting, thus avoiding the possibility of changing the metallographic structure of the sample when exposed to heat. 2、 Technical indicators: 1. Power supply: 380V/220V, 50HZ 2. Spindle speed: 2800r/min 3. Grinding wheel specification: 250 × two × 32mm 4. Maximum cutting diameter: φ 30mm 5. Cutting power: 1.1kw 6. Weight: 60kg 7. Overall dimensions: 470 × three hundred and ninety × 360mm