This fully automatic single head terminal pressing machine mainly uses imported components to achieve precise actions such as cutting wires, peeling, and terminal pressing, with simple operation and stable performance. LCD display screen, Chinese interface, high clarity, and easy operation. Equipped with wire detection, air pressure detection, and riveting pressure detection devices. The entire peeling length is set on the Chinese menu panel with a touch film switch. Fast adjustment of technical performance, short adjustment time, easy operation, suitable for horizontal and vertical types. Flag type, OTP mold.
机台型号(Model) | HNB-01B |
function | Wire cutting, single end peeling, double end peeling, single end pressing, single end twisting, multi section peeling |
capacity | 6100条/小时（长度100mm以内） 4600-5800条/小时（长度100-600mm以内） |
power supply | AC220V 50HZ/60HZ(单相) |
Machinable wire | AWG#14-AWG#30 |
cut length | 35mm-9999mm |
Cutting accuracy | Change range: 1mm+cutting length below 0.2% |
Stripping Length | 1mm-10mm |
Twisted wire length | 3mm-15mm |
Pressing capacity | 2.0T |
Detecting device | Wire error detection, wire knotting, and wire stripping detection (optional) |
air pressure | 0.5Mpa-0.7Mpa |
