A brief introduction
The digital MTZ-400Z inverted metallographic microscope system is an organic combination of traditional optical microscopes and computers (digital cameras) through photoelectric conversion. It can not only perform microscopic observation on the eyepiece, but also observe real-time dynamic images on the computer (digital camera) display screen, and can edit, save, and print the required images
Digital MTZ-400Z series inverted metallographic microscope
1、 System Introduction
The inverted metallographic microscope system is an organic combination of traditional optical microscopes and computers (digital cameras) through photoelectric conversion. It can not only perform microscopic observation on the eyepiece, but also observe real-time dynamic images on the computer (digital camera) display screen, and can edit, save, and print the required images.
2、 Technical parameters:
1. Eyepiece
type
Magnification factor
Field of view (mm)
Flat field eyepiece
10X
Ф eighteen
2. Objective lens
Objective lens type
Magnification factor
numerical aperture
Working distance (mm)
Plan Achromat
10X 0.25 8.9
20X 0.40 8.7
40X 0.60 3.7
100X (oil) 1.25 0.44
3. Total magnification
Optical magnification: 100X 200X 400X 1000X
System reference magnification: 100X-2600X
4. Stage: Size: 200mm * 152mm
Moving range: 30mm * 30mm
Carrier plate aperture: Ф 15 Ф 20mm
5. Focusing system: Coaxial coarse and micro movement with limit and adjustment device,
Micro motion grid value 0.002mm
6. Pupil distance adjustment range: 53-75mm
7. Color filter: yellow, green, blue
8. Lighting system: 6V/20W halogen lamp, adjustable brightness, AC 220V (50Hz)
3、 System composition:
Computer inverted metallographic microscope (MTZ-400E): 1. Metallographic microscope 2. Adaptor 3. Camera (CCD) 4. A/D (image acquisition) 5. Computer
Digital camera inverted metallographic microscope (MTZ-400Z): 1. metallographic microscope 2. adapter mirror 3. digital camera
